DJI Inspire 2 Professional Combo w Zenmuse X5S +Apple Pro Res

Ships on 15th of March 2021
SKU
DJI Inspire2 Professional Combo
  • Advanced Obstacle Sensing
  • Spotlight Pro 
  • Broadcast Mode
  • 8x DJI Intelligent batteries included
  • Dual Battery Design
  • comes with Zenmuse X5S
  • upgraded M4/3 sensor
  • shoots 20.8 MP photos
  • 2x DJI Crystal Sky monitors included
  • Cendence Remote Controller also included
  • Apple Pro Res Activation Key

Special Price $14,999.00 Regular Price $16,990.00

DJI Inspire 2 Professional Combo

Inspire 2 Professional
The Zenmuse X5S has an upgraded M4/3 sensor that shoots 20.8 MP photos and Apple ProRes video at up to 5.2K.
Compared to previous DJI gimbal cameras, the X5S delivers a better signal-to-noise ratio and a dynamic range of up to 12.8 stops. Already included is the Cendence remote controller and 2x High Brightness 7.85" CrystalSky monitors.
This Inspire 2 Professional Combo sets a new standard for aerial imaging.

The Inspire 2 is now able to accelerate to 50 mph in 4 seconds and reach a top speed of 58 mph.
Follow up fast-moving subjects for dramatic sports and action footage. With the 8 included LiPo batteries onboard - the sky is the limit.

Advanced Obstacle Sensing
Forward and downward vision systems enable the Inspire 2 to detect obstacles up to 30 meters ahead, allowing for protected flight at up to 34 mph at a controllable attitude angle of 25°. Upward-facing infrared sensors scan obstacles 16' above, adding protection when flying in enclosed spaces. Obstacle-sensing systems are active during normal flight, RTH, and all Intelligent Flight Modes.

Spotlight Pro
Spotlight Pro is a powerful tracking mode that allows even single pilots to capture complex, dramatic images. It uses advanced, visual-tracking algorithms to lock onto a subject during flight, regardless of the direction that the Inspire 2 flies, creating shots that would once have required a dedicated camera operator. If the gimbal comes close to reaching its rotation limits, the Inspire 2 itself will rotate in the same direction without affecting flight control or the shot being captured to free up gimbal movement.

Spotlight Pro has two shooting modes: Quick Mode and Composition Mode.
In Quick Mode, select an object to begin tracking. In Composition Mode, select the subject and the tracking position. When the subject enters the preset tracking position, press the shortcut to begin tracking. The gimbal can be moved during shooting for composition adjustments. Spotlight Pro is available in all Intelligent Flight Modes including ActiveTrack, TapFly, Waypoint and Point of Interest.

TapFly
The 2-axis onboard FPV camera separates the flight view from the main camera view, effectively giving the Inspire 2 a dedicated "tap-to-fly" camera. Tap a point onscreen in the FPV view to set a flight route and the Inspire 2 will automatically fly along that route, leaving the pilot to focus on gimbal movement.

ActiveTrack
The ActiveTrack Mode allows the Inspire 2 to recognize a range of objects, from people to bikes to cars to boats. Tracking profiles that can be adjusted based on the subject being tracked means greater tracking precision.

Smart Return Home
Forward and downward vision systems allow the Inspire 2 to create a real-time map of its flight route as it flies. If the video transmission system signal is lost and Smart Return Home is enabled, it is able to fly home along its original route and change to a straight line when it regains a signal. As it returns, it will use the primary camera to identify obstacles as far as 200m in front, allowing it to plan a safe route home. It is also able to reconnect more quickly after losing connection.

Video Transmission System
The Inspire 2 features DJI's Lightbridge technology. This iteration has an effective transmission distance of up to 4.3 miles (under ideal conditions) and is capable of delivering both 1080p/720p video as well as the FPV view to pilot and camera operator. Users can also switch between 2.4 GHz and 5.8 GHz control frequencies to avoid interference for greater signal stability. Master and Slave setups are also supported. The master controller can transmit an HD video signal to the slave controller up to 300' away without image quality loss.

Broadcast Mode
Broadcasters can broadcast direct from the Inspire 2 using its dedicated 1080i50 and 720p60 transmission signal. Aerial live-streaming direct to TV is as simple as connecting the Inspire 2 transmitter to the satellite truck.

Powerful Flight Performance
The propulsion system can thrust the Inspire 2 up to 58 mph and allows for descents at up to 29 feet-per-second and ascents at up to 19 feet-per-second. It can accelerate from 0 to 50 mph in just four seconds and flies at a max attitude angle of 40°. The two controller sticks on the transmitter are tuned for more sensitivity, making delicate maneuvers easier.

Dual Battery Design
Dual batteries mean that, if a problem occurs on one battery, the other is able to continue flight long enough for a safe landing. At the same time, the Inspire 2 propulsion system is driven a PWM signal with serial port signal redundancy so that if PWM signals are lost, transmission will continue through the serial port.

Technical Specs

Performance
Takeoff Weight Maximum: 8.82 lb / 4 kg
Maximum Flight Altitude Standard Propellers: 8200' / 2500 m
Hi-Altitude Propellers: 16,400' / 5000 m
Maximum Flight Time 27 minutes (approx.) with Zenmuse X4S Gimbal Camera
Maximum Tilt Angle P-mode: 35° (Forward Vision System enabled: 25°)
A-mode: 35°
S-mode: 40°
Maximum Ascent Speed P-mode/A-mode: 16.4 ft/s (5 m/s)
S-mode: 19.7 ft/s (6 m/s)
Maximum Descent Speed Vertical: 13.1 ft/s (4 m/s)
Tilt: 13.1-29.5 ft/s (4-9 m/s)
Maximum Speed 58 mph (94 km/h)
GPS Accuracy Vertical: ±1.64' / 0.5 m (±0.33' / 0.1 m, with Downward Vision System enabled)
Horizontal: ±4.92' / 1.5 m (±0.98' / 0.3 m, with Downward Vision System enabled)

Downward Vision System
Velocity Range < 32.8 ft/s (10 m/s) at height of 6.56' / 2 m
Altitude Range < 32.8 feet / 10 m
Operating Range < 32.8 feet / 10 m
Operating Environment Surfaces with clear patterns and adequate lighting (> 15 lux)
Upward Infrared Sensor
Obstacle Sensory Range 0-16.4' / 0-5 m
Field of View ±5°
Operating Environment Large-size non-reflective obstacles

Forward Vision System
Obstacle Sensory Range 2.3-98.4' / 0.7-30 m
Field of View Horizontal: 60°
Vertical: 54°
Operating Environment Surfaces with clear patterns and adequate lighting (> 15 lux)

Transmitter
Operating Frequency 2.400-2.483 GHz, 5.725-5.850 GHz
Maximum Transmission Distance 2.4 GHz: 4.3 mi / 7 km
5.8 GHz: 4.3 mi / 7 km
EIRP 2.4 GHz: 26 dBm
5.8 GHz: 28 dBm
Battery Type: Built-in
Chemistry: Lithium-ion polymer (LiPo)
Capacity: 6000 mAh
Configuration: 2S
Output Power 9 W
USB Power iOS: 5.2 VDC, 1 A (maximum)
Android: 5.2 VDC, 1.5 A (maximum)
Operating Temperature 14 to 104°F / -10 to 40°C

Battery
Chemistry Lithium-ion polymer (LiPo)
Capacity 4280 mAh / 97.58 Wh
Configuration 6 S
Voltage 22.8 VDC
Weight 1.1 lb / 515 g
Charger Voltage: 26.1 V
Rated Power: 180 W
Environmental Charging Temperature: 41 to 104°F / 5 to 40°C Operating Temperature: 14 to 104°F / -10 to 40°C
Maximum Charging Power 180 W

General
Operating Temperature 14 to 104°F / -10 to 40°C
Dimensions Diagonal: 23.8" / 60.5 cm (excluding propellers)
Weight 7.25 lb / 3.3 kg (including two batteries, without gimbal and camera)

DJI Zenmuse X5S
Equipped with an uprated Micro 4/3 sensor, the DJI Zenmuse X5S has a dynamic range of 12.8 stops with a much improved signal to noise ratio and color sensitivity than the X5R. Included here are the gimbal, camera, and lens.

The new CineCore 2.0 image processing system on the Inspire 2 makes the Zenmuse X5S capable of capturing 5.2K 30fps CinemaDNG video and Apple ProRes video, as well as 4K 60fps using H.264 and 4K 30fps using H.265 (both at 100Mbps). Continuous DNG burst shooting at 20fps with 20.8MP images is also supported. The Zenmuse X5S was designedto keep pace with the rigors of high-end professional aerial imaging.

What's in the box:
1x DJI Inspire 2 Aircraft
1x Remote Controller
1x Cendence Remote Controller
5x Propeller Pairs
8x Intelligent Flight Battery
1x Charger
1x Battery Charging Hub
1x Power Cable*
1x USB Cable (with Double A Ports)*
1x 16GB micro SD Card*
1x Vision System Callibration Plate*
3x Gimbal Damper*
1x one Pair of Propeller Mounting Plates*
1x Carrying Case*
4x Battery Insulation Sticker*
1x Apple ProRes Activation Key
1x Zenmuse X5S
2x CrystalSky (7.85" High Brightness)
2x CINESSD(240G)
1x CINESSD Station (USB3.0)
1x DJI Focus Handheel 2
1x DJI Focus Handwheel 2 Cendence Remote Controller Stand
1 year AU warranty

*Accessories are not covered by warranty

Please note:
The Inspire 1 Remote Controller is not compatible with the Inspire 2.
The Inspire 2 supports Master and Slave remote controllers. The maximum effective distance between the Master and Slave controllers is 100 meters, and both controllers will receive the same HD live view. CINESSD Reader and CINESSDs are required when recording to CinemaDNG or ProRes. (The X5R SSD is not compatible with the Inspire 2)

 WARNING: Carefully read instructions to ensure proper configuration before use. Failure to use this product responsibly may result in loss, damage, or injury.

Customer Reviews

Ratings & Reviews

Be the first to review this product

© 2021 Aus-Cameras.com.au